Mud Pump Spares

Piston Assembly

EMCON” Piston Rubber Assemblies are available as a kit comprising Piston Rubber, End Plate & Snap Ring for field replacement.

We manufacture replacement screen for following - Derrick, Kemtron, Brandt, MI-Swaco etc.

Liners

EMCON” offers very high quality and precision machined sleeved bi-metallic liners finished to relevant API dimensions. They are available for various pumps, manufactured by Oil Well, National, Gardner Denver, Omega, Ellis Williums, Bournedrill and others. They are available in different sizes ranging from 5" to 7.1/2" diameter. Accurate mirror finish at inside diameter of the liner ensures very high lives for the Pistons.

We manufacture replacement screen for following - Derrick, Kemtron, Brandt, MI-Swaco etc.

Valves And Seats

EMCON” Full open Seat & wing guided Valve design features a large metal-to-metal bearing area for long life and the urethane bonded insert results in a perfectly round inset that prevents premature seal failures of the inserts. The insert is molded around the serrations, inserts failure due to tears from the serrations are eliminated. Most importantly the insert is not stretched over the valve during installation; there are no residual stresses from installation to shorten insert life.

We manufacture replacement screen for following - Derrick, Kemtron, Brandt, MI-Swaco etc.

Rod And Clamps

EMCON” screens are designed to maximize solids removal capabilities while significantly reducing costs associated with drilling fluid and disposal. The use of EMCON screens lowers the percentage of drilled solids in the mud system. Less dilution is required, decreasing total drilling fluid requirements and disposal costs. Cleaner drilling fluid will decrease down hole problems which can adversely affect drilling time. All the benefits of clean drilling fluid lead to one end result.

We manufacture replacement screen for following - Derrick, Kemtron, Brandt, MI-Swaco etc.

Rubberised Spares Parts

EMCON” screens are designed to maximize solids removal capabilities while significantly reducing costs associated with drilling fluid and disposal. The use of EMCON screens lowers the percentage of drilled solids in the mud system. Less dilution is required, decreasing total drilling fluid requirements and disposal costs. Cleaner drilling fluid will decrease down hole problems which can adversely affect drilling time. All the benefits of clean drilling fluid lead to one end result.

We manufacture replacement screen for following - Derrick, Kemtron, Brandt, MI-Swaco etc.